One Stop Systems OSS-412-BP, User Manual

Page: 12 / 15

One Stop Systems
OSS-BP-412 | 12
3.5.3 Connecting PCIe 3.0 Cables
For more detail on how to properly connect the PCIe 3.0 cables, please read the manual for the HIB68x16 card.
3.6 Power Up the System

Connect external power brick to the 2-slot backplane. The board LED will turn ON (as solid red). The board is at standby-mode.

Power up the Host computer. It will instantly power up the Target card and the backplane (the red LED will turn OFF).

Link between the host and target will be established after the host computer is powered UP. For details and information on the LINK
led for each cable adapter cards, please read the assigned manual for the cable adapter card.
3.7 Using any Third-party I/O device

The add-in card or third-party I/O device must be installed in the endpoint slot (expansion slot / downstream port).

Connect the external power source (separate from the host system power supply) to the add-in card or PCIe card device if
necessary.
3.8 Force Power ON

Install shunt or jumper on J1 connector to force power on the backplane. This is not required for normal operation.