background image

 

grounded in accordance with all codes and ordinances.  Never remove the    

 

grounding prong or modify the plug in any way.  Do not use any adapter  

 

 

plugs.  Check with a qualified electrician if you are in doubt as to whether    

 

the outlet is  properly grounded.

  If the product should electrically malfunction    

 

or break down, grounding provides a low resistance path to carry electricity away   

 

from the user.

5. 

Double insulated products are equipped with a polarized plug (one blade is   

 

wider than the other).  This plug will fit in a polarized outlet only one way.  If   

 

the plug does not fit fully in the outlet, reverse the plug.  If it still does not    

 

fit, contact a qualified electrician to install a polarized outlet.  Do not   

 

 

change the plug in any way.

  Double insulation       eliminates the need for the    

 

three wire grounded power cord and grounded power supply system.

6. 

Avoid body contact with grounded surfaces such as pipes, radiators,   

 

 

ranges, and refrigerators.  

There is an increased risk of electric shock if your    

 

body is grounded.

7. 

Do not abuse the Power Cord.

  

Never use the Power Cord to carry this  

 

 

product or pull the Plug from an outlet.  Keep the Power Cord away from  

 

 

heat, oil, sharp edges, or moving parts.  Replace damaged Power Cords  

 

 

immediately.

  Damaged Power Cords increase the risk of electric shock.

8. 

When operating this product outside, use an outdoor extension cord   

 

 

marked “W-A” or “W”.  

These extension cords are rated for outdoor use, and    

 

reduce the risk of electric shock.

PERSONAL SAFETY

 

9. 

Stay alert.  Watch what you are doing, and use common sense when    

 

 

operating this product.  Do not use the Fountain while tired or under the  

 

 

influence of drugs, alcohol, or medication.

  A  moment of inattention while  

 

 

operating this product may result in serious personal injury.

10. 

Avoid accidental starting.

  Make sure the Power Cord remains unplugged from   

 

its electrical outlet until this product is completely assembled, filled with water,  

 

 

and ready to use.

SKU 93442        

 For technical questions, please call 1-800-444-3353   

     PAGE 3

11. 

Do not overreach.  Keep proper footing and balance at all times. 

 Proper   

 

 

footing and balance enables better control of this product in unexpected

 

situations. 

Summary of Contents for 93442















Reviews: