SKU 92771 For technical questions, please call 1-800-444-3353.
Page 4
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
Harbor Freight Tools is not responsible for placing this product in an unsafe
environment and causing an accident.
Unpacking
When unpacking the Copper Fire Pit, check to make sure that all parts are
included as shown in the parts list. If any parts are missing or broken,
please call Harbor Freight Tools at the number below.
Assembly
The Copper Fire Pit has a diameter of 30” and snugly fits into it’s Wrought Iron
Stand. It is also suitable for outdoor wood burning.
Find a safe, dry, well lit work space to do the assembly. An elevated work bench
will make the job much easier. You will require a small adjustable wrench (not
included) to complete this task. Hand tools are available from Harbor Freight
Tools.
WARNING: Before assembly, remove the protective plastic film. Do not use the
grill with this film in place.
1.
Place the Large Ring (2) upside down (holes up).
See Figure A on the
next page.
2.
Place and lightly fasten one Leg (4) to the Large Ring (2) with an Allen Bolt
(5). Use the Allen Wrench (included) but do not fully tighten the Bolt at this
time. Repeat these steps on the other three Legs.
3.
In the U-shaped bracket on each Leg (4), insert the Small Ring (3). Lightly
fasten each Leg to the Small Ring with the Allen Bolts (5). Lightly tighten the
hardware with the Allen Wrench.
18.
Never use the Fire PIt Indoors; while lit, charcoal briquettes
emit carbon monoxide, a colorless, odorless gas that can
cause DEATH when inhaled.
