www.oneremote.dk
Page 6
Antenna Connection
The OneRemote DabFM2 tuner may be connected to any antenna designed for FM and the DAB reception, if the
supplied one is not sufficient.
o
If the FM signal strength is not sufficient the reception will be noisy.
o
If the DAB signal strength is not sufficient the reception is varying from
disturbing ”bubbles” to complete quietness.
o
If no signal is received the display indicates N/A.
Automatic Power Up and Down
As default factory setting the tuner is manually powered up and down with the
q
button. As the display is
automatically dimmed 10 seconds after any operation, powering the tuner down is not a strict requirement.
If automatic powering up and down with the source selection is desired, programming a specific option allows for that.
Option Code
Function
Option 990
The tuner can only be powered up and
down, using the
q
button.
Option 991
The tuner automatically powers up and
down.
Important Info about the Automatic Power Mode.
When the automatic power option has been set, the tuner turns on and off automatically with the source selection. But
if the tuner’s clock has not been set, automatic power up and down is NOT possible.
The clock is automatically set 10-30 seconds after power has been applied to the tuner, provided a DAB station has been
received. Thus the automatic power option cannot be used if the tuner is switched off the mains regularly.
Menu
Pressing
S
enters the tuner’s main Menu.
Use the
DF
buttons to select one of the sub menus:
Manual scan
Contrast
System reset
Software version
