One for All URC10820N, User Manual

Page: 5 / 34

5
DEVICE
KEY
CONTROLS THESE DEVICES
DVD
DVD, VCR, DVD/R, HTiB, DVD/VCR
CD
CD, Home Automation, CD/R (Recorders)
PVR
PVR/DVR Only Devices
AUD
Tuner, Amp, Misc. Audio, HTiB (Home
Theater In A Box)
AUX1
Tuner, Amp, Misc. Audio, HTiB (Home
Theater In A Box)
AUX2
Media Center PCs, Satellite, Satellite/
PVR/DVR, Cable, Cable/PVR/DVR, Video
Accessories
Setting Up Your Components
This remote is preprogrammed at the factory to operate a Sony TV,
DVD and VCR, an RCA DirecTV Satellite box, a Motorola Cable Box,
a Sony Tivo PVR, a Pioneer Receiver and CD, a Sony Receiver (in
the
AUX1 Mode), and a Microsoft Media Center PC (in the AUX2
Mode). To control devices other than the default brands, perform
the following steps; otherwise skip this section.
NOTE: For Combo Device control, see the next section.
1. Turn on a device (e.g., TV, VCR or DVD player) and, if applicable,
insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before
proceeding. Highlight or write down the codes and device you
wish to program before starting step 2.
2. On the remote control, press a device key once (i.e., TV , CBL ,
SAT , VCR , DVD , CD , PVR , AUD , AUX1 or AUX2 ).
NOTE:
Use the
AUX1
key to program control of an audio device
such as an AMP, HTIB (Home theater in a box), or a tuner. Use
the
AUX2 key to program control of a Media Center PC (with
IR receiver). Alternately, use the AUX1 or AUX2 key to program
control of a second device type (e.g., a second VCR; see “Re-
assigning Device Keys”).
3. Press and hold SET until the LED (red light) blinks twice, then
release SET .
4. Use the accompanying code lists to locate the type of device
and brand name and then enter the first four-digit code for
your device. If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4
and enter the same code again.
5. Aim the remote control at the device and press POWER once.
The device should turn off. If it does not, repeat steps 2 through
5, trying each code for your brand until you find one that
works. If it still doesn’t work, try “Searching for Your Code.”
NOTE: If the device does not have a POWER key, press the
(PLAY) key.