W W W.ONEFORALL.COM
9
Colour and Brightness
Depending on the functions of your original remote control, the ONE FOR
ALL may operate the colour and brightness settings of your television.
Colour (+)
= Press and release MAGIC then hold Volume (+)
Colour (-)
= Press and release MAGIC then hold Volume (-)
Brightness (+) = Press and release MAGIC then hold Channel (+)
Brightness (-) = Press and release MAGIC then hold Channel (-)
Volume Punch-Through
You may be able to use some features of your Television, Video Recorder,
Satellite Receiver or Cable Converters at the same time. If you're watching a
programme on your Video, you can adjust the volume (a TV function) with-
out first pressing the TV key. The chart below lists some of the possibilities:
Last Key Pressed:
You Can Control:
VCR
TV volume up and down, mute
SAT
TV volume up and down, mute
To punch through to TV Volume while in VCR or SAT mode press
MAGIC* 9 9 3
TV key
.
To cancel the ”Volume Punch Through”
Press MAGIC* 9 9 3 ) (the red light will blink four
times).
* Here you must hold down MAGIC until the red light key blinks
twice.
Auto Scan
Your ONE FOR ALL 4 comes with a special Auto Scan function which lets
you “scan” through every programme available on your device.
For example, to scan the programmes on your TV:
1
Aim the ONE FOR ALL 4 at your TV. Press the
TV
key. Press and
release
MAGIC
then press the
MUTE
key.
The ONE FOR ALL 4 will send the command to advance through all
the programmes available on your Television stopping at each pro-
gramme for about three seconds. Remember, you must aim the ONE
FOR ALL at your device the entire time you are using Auto scan.
2
When you find a programme you would like to watch, simply press
any key
on the ONE FOR ALL key pad to stop the Auto Scan
feature.
Advanced Features
Important note:
Auto Scan may not work with devices that did not have
pro/- keys on the original remote control.
Note:
You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.
