One for All SV-1716 Instruction Manual Download Page 6

6

WWW.ONEFORALL.COM

The following paragraphs contain a few examples.

EXAMPLE 1:

Play video on the VCR (source) in the living room and watch

the picture on the TV (destination) in the bedroom.

Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the bedroom. Switch on the video and insert a
tape. Place the IR eye on / in front of the IR receiver of the VCR. Switch on the TV in the bedroom.
Select the mode on the TV for “Line In” (AV, EXT or channel 0). Aim the VCR remote control to the IR eye and press
play. The video should start playing and picture and sound should appear on your bedroom TV screen.

EXAMPLE 2:

If you do not have coax cable connection with the TV in the bedroom

you can tune in the channels on your VCR (source) in the living room

and watch the picture on the TV (destination) in the bedroom.

You may need the manual of your VCR to tune in the TV channels.
Once all channels are tuned in, you are able to watch your TV channels through your AV channel.
Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the bedroom. Switch on the video.
Place the IR eye on / in front of the IR receiver of the VCR. Switch on the TV in the bedroom. Select the mode
on the TV for “Line In” (AV, EXT or channel 0). You can take the remote of your VCR to your bedroom to control
your TV channels tuned in your VCR.

EXAMPLE 3:

Also, if you do not have coax cable connection with the TV in the bedroom,

the AV Sender gives the possibility to view your Satellite Receiver (source) programs

also on the TV (destination) in the bedroom.

You probably already tuned in the channels on your Satellite Receiver. If not, you may need the manual of your Satellite
Receiver to tune in the TV channels. Once all channels are tuned in, you are able to watch your TV channels through
your AV channel (or other output channel). Connect the TRANSMITTER to the Satellite Receiver and the RECEIVER
to the TV in the bedroom. Switch on the Satellite Receiver. Place the IR eye on / in front of the IR receiver of the
Satellite Receiver. Switch on the TV in the bedroom. Select the mode on the TV for “Line In” (AV, EXT or channel 0).
You can take the remote of your Satellite Receiver to your bedroom to control your TV channels tuned in your Satellite
Receiver.

Getting Started

SV_1716_AV_Sender UK 15x17:SV_1715_AV_Sender 17 talen  05-11-2007  12:09  Pagina 6

Summary of Contents for SV-1716









Reviews: