W W W.ONEFORALL.COM
9
Search Method
--> If your device does not respond to the
KAMELEON 3
after you have tried
all the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained in the
memory of the
KAMELEON 3
.
Example: To search for your TV code:
1.
Switch ON your Television (not on standby).
2.
Press the
TV
key on your
KAMELEON 3
.
3.
Press and hold down the MAGIC key
(for about
3 seconds) until the rabbit comes out of the hat.
4.
Press
9 9 1
, the IR Indicator will light up twice.
5.
Next, press
POWER
.
6.
Point the
KAMELEON 3
at your Television. Now press CH+
over and over, until your Television turns off
(every time
you press the CH+ key the
KAMELEON 3
will send out a POWER
signal from the next code contained in the memory).
You may
have to press CH+ many times (up to 150 times) so
please be patient. Remember to keep pointing the
KAMELEON 3
at your Television while pressing this key.
If you skip past a code, you can go to the previous code(s) by
pressing the CH - key.
7.
When your Television switches off
, press the
MAGIC
key to store the Code. The IR Indicator
will light up twice. Now your
KAMELEON 3
should be ready to control your television.
-
Most TV’s do not switch on pressing the POWER key. Please try pressing a
“number” key or the “TV-text off” key to switch your TV back on.
-
If you cannot control your Television properly, please continue the Search
Method, you may be using the wrong Code.
-
To search for the code for another device follow the instructions above only
press the appropriate device key instead of TV during step 2.
-
If the original remote control of your Video recorder or DVD player does
not have a POWER key, press PLAY instead of POWER during step 5.
Setting up the
KAMELEON 3
Kameleon_3_nieuw_2004_11x20 Eur 23-08-2004 12:59 Pagina 9