USING KEYMOVER
The One For All 6-Device PVR Universal Remote
Control includes a Keymover feature that allows you to
map (or copy) keys from one mode (i.e., source mode)
to another mode (i.e., destination mode).
NOTE: The following keys cannot be used as a source or
destination:
TV
,
PVR
,
DVD
,
CBL/SAT
,
AUD
,
VCR
, and
SET
.
Programming Keymover
For example, if your VCR does not have volume control,
you can map those keys (i.e.,
VOL+
,
VOL-
, and
Mute
)
from the TV mode to the VCR mode as follows:
1.
Press and hold
SET
until the
LED
(red light)
blinks twice, then release
SET
.
2.
Enter
9
-
9
-
4
. The
LED
will blink twice.
3.
For the source mode, press
TV
once.
4.
For the source key, press
VOL+
once.
5.
For the destination mode, press
VCR
once.
6.
For the destination key, press
VOL+
once.
7.
The
LED
will blink twice indicating the
keymoved sequence is correct.
8.
Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting
VOL-
and
Mute
as source and
destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now
use your One For All 6-Device PVR Universal Remote
Control to control the TV’s volume and mute in the
VCR mode, as well as in the TV mode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key
1.
Press a device key that has a keymoved key.
2.
Press and hold
SET
until the
LED
(red light)
blinks twice, then release
SET
.
3.
Enter
9
-
9
-
4
. The
LED
will blink twice.
4.
Press the destination key twice (where the
keymoved key is stored). The
LED
will
blink twice.
14
OFA 6 PVR 2/15/03 9:25 AM Page 14
