WARRANTY POLICY
This Flight Systems manufactured re-
placement generator/ATS control is warranted to be free from defects
in materials and workmanship for a period of two years from the date
it was sold.
(This date appears on unit label)
Flight Systems’ Limited Warranty covers the repair or replacement
of defective product within the warranty period. It does not cover the
cost of installation, or removal costs incurred, or possible damage to
other equipment (including the generator or parts thereof) as a result
of this product.
Flight Systems (or its authorized agent) shall reserve the right to de-
termine the cause of malfunction.
In the case if we determine that it
was due to abuse, misuse, improper installation, acts of nature (such
as storms), failure to perform recommended gen set maintenance
procedure or problems elsewhere in the gen set, the warranty claim
shall be disallowed and established repair rates shall apply.
Ship
defective units directly to:
Flight Systems, 207 Hempt Rd. Mechanicsburg, PA 17050
- Attention: Warranty Repair
Please prepay all freight charges and note the nature
of the failure, if known.
NOTE:
The standard
56-4296-00 and 56-
4297-00 boards are
factory set to use “bat-
tery voltage” as the
start command signal
(W3 & W4 = B). On
special request, these
boards can be fur-
nished to use “ground”
as the start command
signal (W3 & W4 =
A). Table 2 below
shows how to set the
DIP switches if you
want to keep the fea-
ture selection settings
the same as on the
board being replaced.
RETURN POLICY
Unwanted items
may only be returned within 30 days of original purchase date
. Refund/
credit issued shall be less a 25% per item restocking/re-test fee as long as unit is in new, undamaged condition.
Ship-
ping charges are not refundable.
TECHNICAL SUPPORT
Technical support is available by phone, fax or the internet for this and all Flight Systems products.
Phone: 717-590-7330 (8:00am - 4:30pm ET, M-F)
Fax: 717-590-7327 Email: [email protected] Web: www.flightsystems.com