Preparation:
Before you update the firmware, please prepare these tools below:
1.
PC x 1 (For Win XP , Win7 32/64bit with
.netframework4.0 installed
)
2.
Micro SD card(Max capacity 64GB, Class 10) x 1
3.
USB to Micro-USB Cable x 1
4.
Find and download the firmware kit from bbs.onagofly.org
a.
ONAGOfly0630.bin
and unzip it. The kit includes these
files as below:
b.
ONAGOfly0630.ong
c.
ONAGOflySetup0630.msi
Step
Ⅰ
: UPDATE YOUR FLIGHT CONTROL SYSTEM.
a.
Install ONAGOflySetup0630.msi Utility on your PC, and there is an “ONAGOflyDriver” icon
on your Windows Desktop(Figure 1) after the installation.
Figure 1
b.
Connect your PC and your Drone with the USB to Micro-USB Cable.
Figure 2
c.
Run ONAGOflyDriver Utility, and press the “load” button(figure3) to load the
“ONAGOfly0630.ong” file.
Figure 3
d.
You need to re-plug the cable on the board and click “OK” to wait for the update(Figure 4).
