NBSG16BAEVB, NBSG16VSBAEVB
http://onsemi.com
5
Setup
Connect Power
Step 1:
1a:Three power levels must be provided to the board for V
CC
, V
EE
, and GND via the sur-
face mount clips. Using the split power supply mode, GND = V
TT
= V
CC
– 2.0 V.
NBSG16/16VS Power Supply Connections
3.3
V Setup
V
CC
= 2.0 V (Two Places)
V
TT
= GND (One Place)
V
EE
= -1.3 V (One Place)
NBS/16VS Only Power Supply Connection
3.3
V Setup
V
CTRL
(One Place)
NOTE:
For frequency domain measurements, 2.5 V power supply is not recommended because
additional equipment (bias tee, etc.) is needed for proper operation. The input signal has to
be properly offset to meet V
IHCMR
range of the device
.
