MT9P017LACSTCH
−
GEVB
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with
each jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1
Pins 1
−
4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Figure 7. EEPROM Switches in Their Default Positions. The First Switch (A0) of SW3 is ON, the Second Switch
(A1) is ON, the Third Switch (A2) is OFF, and the Fourth Switch (WP) is ON.
A0
A1
A2
A0
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name
Pins
Description
P1
SADDR
1
−
2 (Default)
I
2
C Address: 0x6C
2
−
3
I
2
C Address: 0x20
P3
FLASH
1
+5V0
2
GND
3
FLASH
4
+3V3
P4
GPIO
1
GPI0
2
GPI1
3
GPI2
4
GPI3
