ON Semiconductor MT9M021IA3XTMZH-GEVB, User Manual

Page: 4 / 5

MT9M021IA3XTMZH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS (continued)
Jumper/Header No. Description Pins Jumper/Header Name
SW1 TEST
On (Default) Test Mode
Off Normal Operation
SW2 STANDBY
On (Default) Standby mode enabled
Off Normal operation
SW3 O_EN On (Default) Output disabled
Off Output enabled
SW4 STANDBY On (Default) Standby mode enabled
Off Normal operation
SW5 SHUTTER On (Default) Connects to on-board signal from Demo 2X Board
Off Connects to external shutter from P3
SW6 EEPROM ADDR A2 On, A1 Off
(Default)
EEPROM Address set to 0xA8
A2 On, A1 On EEPROM Address set to 0xAC
A2 Off, A1 On EEPROM Address set to 0xA4
A2 Off, A1 Off EEPROM Address set to 0xA0
SW7 ON_LED
On (Default) Connects LED indicator to +VDD_BUS
Off Turn off LED indicator
SW8 MCLK
On (Default) Connects to CK_DEMO 2 from Demo 2X board
Off Connects to external signal on Pin 2 from P10 header
SW9 CLK_SELECT On (Default) Connects to on-board oscillator
Off Connects to output from SW8
SW10 RESET N/A When pushed, 380 ms reset signal will be sent to MT9M021
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has a similar
26-pin connector and 13-pin connector which mate with J3
and J4 of the headboard. The four mounting holes secure the
baseboard and the headboard with spacers and screws.