background image

www.onsemi.com

6

ON Semiconductor Confidential

Ezairo® 7111 V2 Pre Suite Getting Started Guide

connection to the programming box. This connector is compatible with the connections provided on most of the 
programming boxes listed in Table 2, with the exception of the Promira. When using the Promira, use the 6-pin DIN to 
34-pin header adapter, provided with the Ezairo 7111 Hybrid Demonstrator Board.

Communicating with a device requires an I

2

C connection between the Windows PC and Ezairo 7111. The I

2

interface is provided by one of a number of different programming boxes that are compatible with Sound Designer 
Software. Supported devices are listed in Table 2.

Sound Designer Software works with any of the programming boxes listed above. In addition, you must ensure that 

the Windows drivers provided by the manufacturer have been installed prior to using Sound Designer Software. 
Windows drivers for the various programming boxes are available from the manufacturers listed below in Table 3.

3.  I

NITIAL

 S

ETUP

This section describes the initial setup for evaluating the Ezairo 7111 V2 Pre Suite. This includes downloading and 

installing the Sound Designer Software Windows application, configuring the Ezairo 7111 Hybrid Demonstrator Board, 
and connecting the programming box. The description is intended for first-time users. If you have already completed the 
initial setup, you can proceed to Section 4.2.1, “Audio Path Configuration” on page 16.

3.1  Prerequisites and Software Downloads

Before attempting to install Sound Designer Software, ensure that the computer meets the following minimum 

requirements:

Hardware

Processor: 1 GHz

Memory: 512 MB RAM

Display: 16-bit color, 1024x768 screen resolution

Hard Drive: 150 MB of free space

Peripherals: communications interface for connecting to the Hybrid Demo Board (typically a serial or 
USB port - see below)

Table 2. Supported Communication Interfaces and Protocols

Interface

I

2

C

Wireless

Communication Accelerator Adaptor (CAA)

X

HiPro

X

DSP3

X

Promira Serial Platform

X

NOAHlink

X

Table 3. Windows Programmer Drivers and Their Manufacturers

Inferface

Manufacturers of Drivers

HiPro2

Otometrics

Promira

TotalPhase Inc.

CAA

ON Semiconductor 

DSP3

ON Semiconductor 

Summary of Contents for Ezairo 7111 V2 Pre Suite




















Reviews: