EVBUM2251/D
www.onsemi.com
2
•
Connect to Hardware.
♦
Select the “Connection” tab within the control GUI.
♦
Select Camera Link or USB.
♦
Click the Connect button.
The yellow light will change to green indicating that
a connection has been established. The system is now ready
to image. If there is a failure, the window will turn red with
an error message. Confirm USB or the Frame Grabber has
been properly recognized by the system using Device
Manager.
Figure 3.
Next Steps
Sensor Studio provides a number of controls to evaluate
operation of the sensor, including image capture,
processing, and characterization. Additional information on
these controls is included in the Sensor Studio help system,
which is available from the HELP menu by selecting “SS2
and Python Help”.
For additional help in system setup, please contact
ON Semiconductor at
www.onsemi.com/imagesensors
or
by e
−
mail at
is
−
.
Downloaded from
Downloaded from
