ON Semiconductor AR0835HS, User Manual

Page: 3 / 5

AR0835HS3C12SUAAH3 − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the
leftmost side of the pin. Grouped jumpers increase in pin
size with each jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pins 1 − 4 Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2 Pin 1
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +VPP Open For Connection to ExVPP Power Supply for OTPM
P2 VCM Open (Default) Form Connection to External AF VCM
P3 TEST 2 − 3 (Default) Normal Operation
P4 ATEST1 Closed (Default) Normal Operation
P5 FLASH Open (Default) For Connection to External Flash
P6 GPI2 Open (Default) Various Sensor Option Settings
P7 SHUTTER Open (Default) For Connection to External Shutter
P8 GPI3 2 − 3 (Default) Normal Operation/Master in Multi-Camera Mode
1 − 2 Slave in Multi-Camera Mode
P9 +VDDIO
1 − 2 (Default) +VDDIO and +VDDIO_LS are Set to +1V8_HB (1.8 V)
2 − 3 +VDDIO and +VDDIO_LS are Set to +2V8_VDDIO_HB
(2.8 V)
P20 +0V4_VDDSLVSPHY 1 − 2 (Default) Connect to On-board +0V4_VDDSLVSPHY (0.4 V) Power
Supply
2 − 3 External Power Supply Connection
P21 +VDDSLVSPHY 2 − 3 (Default) +VDDSLVSPHY is Set to +VDDPHY (1.2 V)
1 − 2 +VDDSLVSPHY is Set to +0V4_VDDSLVSPHY (0.4 V)
P22 CLK_SELECT 1 − 3 & 6 − 8
(Default)
Select On-board 24 MHz Oscillator and Enable Master Clock
Output
3 − 5 Select Demo 3 Clock
2 − 4 Select Slave Clock (for Slave Sensor in Multi-Camera Mode)
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.