ON Semiconductor AP0201AT, User Manual

Page: 5 / 6

AP0201ATSL00XEGAH3 − GEVB
www.onsemi.com
5
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P51 SEN_SDATA Open (Default) AP0201 Serial Control
1 − 2 Demo 3 Serial Control
P52 BEAGLE_SCL
1 − 2 Demo 3 Accessed
2 − 3 Sensor Accessed
P53 BEAGLE_SDA
1 − 2 Demo 3 Accessed
2 − 3 Sensor Accessed
P54 SEN_RST_OUT 2 − 3 (Default) AP0201 Reset
1 − 2 Demo 3 Reset
P55 +1V2_DVDD Selection
2 − 3 (Default) Using On-Board Reg1V2 Power Supply
1 − 2 Using +1V2 Internal Power Supply
P56 +1V2_DVDD_REG
2 − 3 (Default) Using On-Board +1V2_DVDD_ADJ Power Supply
1 − 2 Using +1V2_HB Power Supply from Demo 3
Baseboard
P57 +VDDIO Selection
1 − 2 (Default) Using +1V8_HB Supply for +VDDIO
2 − 3 Using +2V8_HB Supply for +VDDIO
P58 NET_MODE
2 − 3 (Default) I
2
C to Image Co-Processor
1 − 2 I
2
C to Agent Co-Processor
P59 TRIGGER 2 − 3 Connect to GND
1 − 2 Connect to +VDDIO
Open (Default) Control from Demo 3 Baseboard
SW7 RESET N/A When Pushed, 240 ms Reset Signal will be Sent to
AP0201
Interfacing to ON Semiconductor Demo 3 Baseboard
The ON Semiconductor Demo 3 baseboard has a similar
52-pin connector which mates with J1 of the headboard.
The four mounting holes secure the baseboard and the
headboard with spacers and screws.