APPLICATION NOTE
©
Semiconductor Components Industries, LLC, 2017
March, 2018
−
Rev. 1
1
Publication Order Number:
AND9670/D
AND9670/D
IoT Development Kit (IDK)
IDKSmar tPassiveSensor_
RFID Shield
Quick Start Guide: Bring Up Test of
SPS_RFID Shield
INTRODUCTION
This document describes how to use the RFID shield on the IDK
Baseboard and shows the good reading range performance of the
RFID shield with the attached helical whip antenna
Software and Hardware Preparation
Software Requirement:
Windows PC with minimum 1 USB port, installed Java JRE/JDK
v.8u101 or higher, Operation system Windows 7, 8 or 10, mini USB
cable, Installed IDK IDE v3.6.5 or higher
Hardware Requirement:
•
IDK Baseboard with Power connection cable (IoT Baseboard to the
RFID shield)
•
DC Power Supply Adapter, Recommended SMI24
−
12
−
V
−
P6
RFID shield kit is provided with:
•
RFID Shield
•
1
/
4
Wave Whip Antenna for ETSI 866MHz
•
Header 1x 10; 2x 8;1x
•
Smart Passive Sensor
™
(SPS) Tag Samples
Figure 1. RFID Shield Mounted on the IDK Baseboard
RESET button
