8
1. Lay out the Yacht Dock
TM
on a flat surface. Check the area to make
sure there are no sharp objects that could damage or cause a puncture.
(see photo –>)
2.
Every Inflatable Sport Boats
platform includes a hand pump with a
PSI gauge. To inflate simply insert the end of the hose into the closed
valve
(see photo –>)
and twist 1/4 turn to lock into place
(you may
need to hold this in place at first to make sure it has an air tight fit).
Pressure gauge on hand pump will not register until pressure reaches
5.0 PSI. Continue pumping until pressure gauge shows a minimum of
5 to 8 PSI with a maximum of 15 PSI.
3.
You can inflate using a standard 110 volt inflator (like the METRO )
by opening the valve and filling the product with air then closing the
valve once full. Then, attach and use the hand pump to top off until
you come to the suggested 5 to 8 PSI.
(see photo –>)
4.
To deflate,
open valve by pressing down the spring in the middle of
the valve and turn counter clockwise so it stays down. Air will continue
to flow out as you roll up the product to be strapped and stored. You
can also achieve a rapid deflation by putting your power inflator on
reverse and sucking the air back out until the product is flat.
INFLATION AND SET UP
NOTE: THE HOSE CONNECTION WILL AUTO
-
MATICALLY OPEN THE VALVE WHEN PROPERLY
INSERTED AND IT WILL CLOSE THE VALVE
WHEN REMOVED. YOU DO NOT NEED TO MANU
-
ALLY OPEN (PRESS DOWN SPRING) TO USE
THE HAND PUMP OR ELECTRIC INFLATOR.
Using your smart phone's camera, TAP
open the browser link that appears.
Watch our video tutorial available
on our website and YouTube.
https://inflatablesportboats.com/
informational-videos/
Summary of Contents for Inflatable Sport Boats Yacht Dock
Page 15: ......
