On-Hold Plus OHP 8000 User Manual Download Page 6

Page: 6 / 9

Operation

Operation (cont'd)

Playback

Playing Audio Stored in Memory

By default, the unit is always in "playback" mode. When unit is playing,
the LCD will display a running time.

Playback After Power Loss

If power to the unit is lost, the unit will resume playback as soon as power
is reapplied.

Playback Modes

The player is set to the PLAY mode as a default. You may stop playback by
pressing the PLAY/STOP button. Using the "REPEAT MODE" button, you
can select from one of three modes. The "repeat" icon in the LCD will
show which mode you are in:

Repeat all tracks in order
Repeat all tracks in a random order
Repeat the current track only

Saving Your Settings

After setting your volume level, repeat function, and if desired a specific
track to playback, press the "PLAY/STOP" button once. Then press the
"PLAY/STOP" again to resume playback. Doing this allows your settings to
be recalled automatically after the unit loses power and then has the
power reapplied.

Copying New Tracks to the Player

Once connected, the player will show up as two removable drives (i.e.
Drive E & Drive F) in the MY COMPUTER window on your PC. The first drive
will represent the on-board memory (8 MB). The second drive represents
the built-in Smart Media Card reader (slot located on right side of unit,
only available if a card is inserted). The MY COMPUTER window is where
you can manage the content on your player. From this window you can
add or delete files that are stored on your player.

USB Connection

Turn the POWER switch on the back of player to the OFF position.
Plug the USB cable into the USB port on the back of your player
Plug the other end of the cable into the USB port on your computer.
Turn the POWER switch to the ON position (LCD will show an icon of a
computer and a memory card with the word "READY.")
Locate and select any MP3 or WMA audio file(s) or file(s) created and
saved with the MessageStudio software.
Copy the files.
Go to "My Computer" and double click on the player (shown as
"Removable Media"on your PC.)
Paste the files to the player.
Turn the POWER switch on the back of player to the OFF position.
Remove the USB cable and turn the player back to the ON position.

External SD Flash Card

The player is also equipped with a slot for a Secure Digital (SD) flash
card. Files can be copied to the card by putting it into the unit and
connecting the USB cable to a PC. Alternatley, files can be copied to
the card by connecting a smart media card reader to the PC's USB port
and copying files directly to the card. Note: Turn the players power off
whenever connecting a USB cable or inserting or removing an SDcard.

Using a SD Flash Card

The player has an SD card slot located on the right side of the player.
Before inserting the card, power down the unit. Insert the flash card,
gold foil side up, with the notch on the leading edge.

NOTE:

When a SD card is inserted, files stored on the on-board

memory canot be played or viewed. Powering down the unit and
removing the card will allow you to playback content stored on the
on-board memory.

OHP 6000 User Manual