10
AS7421 PC Software
Starting a measurement
5.
If the measured data is needed later for evaluation,
choose an export path. This saves the data in CSV
format.
6.
Align the sensor board with the measurement target and
choose the desired measurement options, such as
continuous measurement, or stop after a desired
amount of measurements.
7.
Then, click
“Measurement“ to start the spectral
measurement process.
8.
Afterward, the software will show the spectrum of the
measured target.
9.
In the lower-left corner it is possible to choose between
different measured spectral data drawings and
calculations.
Fig. 8: AS7421 Demo GUI with a measurement