11
06. SET UP INSTRUCTIONS
With the Sanity Air it is possible to hygienize the environment of an enclose space continuously and
without the need for people to be absent from the enclosure. Below are the different steps that
needs to be followed to carry out the commissioning of the Sanity Air.
Supplies needed for installation
Installation instructions
Step 1. Place the
mold
against the wall where the Sanity Air will be hung.
Step2. Place a
level
on top of the mold to confirm it is level.
Step 3. Use a
pencil
to mark a dot in each mounting hole.
Step 4. Use a
drill bit
to create the holes in the wall. Depending on the type of the wall you need to
use plugs before installation.
Step 5. Screw the lower wall mount onto the wall by using two screws.
Step 6. Screw the upper wall mount onto the wall by using two screws.
Step 7. Place the Sanity Air onto the lower mount (1).
Step 8. Fix the Sanity Air onto the upper mount (2) by using a
hex key
.
Step 9. Place the power supply onto the Sanity Air and turn on the switch to “I”. To switch off turn
the button to “0”.
Summary of Contents for Sanity Air
Page 1: ...Sanity Air User manual...