![background image](http://html.mh-extra.com/html/omron/zx2-series/zx2-series_user-manual_1633407061.webp)
Positioning
61
ZX2 User’s Manual
INTRODUCTION
BASIC
SETUP
PREPARATION
FOR
MEASUREMENT
TROUBLE-
SHOOTING
INDEX
CONTENTS
SETTING
TRANSITION
CHARTS
FLOW OF
OPERATION
MAIN
APPLICATIONS
& SETTING
METHODS
DETAILED
SETTINGS
SPECIFI-
CATIONS
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
Positioning
Procedure for setting up positioning
1
Sensor installation/wiring
Has the Sensor been installed and wired?
(See page 23.)
Set the sensing object in place, adjust the position of the Sensor Head while
looking at the digital display values on the Amplifier Unit or the indicators on the
Sensor Head so that the upper and lower limits of the distance between the Sensor
Head and the sensing object is within the measuring range, and install the Sensor
Head at this position.
2
Set to the MENU mode
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
MENU mode.
Press the button to display
.
* This operation is not
required when scaling is not
to be set.
Arbitrary setting
Required setting
Set to the MENU mode
2
Response time setting
3
Sensor installation/wiring
1
Smart Tuning
4
Setting completed
7
Return to RUN mode
5
Scaling
6
Threshold setting
Required
Required
Select the desired mode to set
the measurement conditions in.
Hold down for
3 seconds
Lit
Press to display
.