![background image](http://html.mh-extra.com/html/omron/zx2-ld100/zx2-ld100_user-manual_1633410100.webp)
Bank Setting
100
ZX2 User’s Manual
INTRODUCTION
MAIN
APPLICATIONS
& SETTING
METHODS
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
DETAILED
SETTINGS
FLOW OF
OPERATION
CONTENTS
PREPARATION
FOR
MEASUREMENT
BASIC
SETUP
TROUBLE-
SHOOTING
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
2
Bank switching
3
Various settings
Set the various menu items that require setting.
Execute smart tuning for each bank to be used because the smart tuning results are not
applied to other banks.
4
Return to RUN mode
The following explains how to switch banks and perform measurement.
Either switch banks by following the steps 1
→
2
→
4 described above, or input the
required signal from an external device to switch the bank.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press the button to display
.
Select the
desired value.
Press the button to select the
bank.
to
Press the
button to apply
the setting.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
RUN mode.
Press to display
.
Default value: 0
Press to select
Hold down for
3 seconds
Out