![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390114.webp)
Setting the System
112
ZW User's Manual
Setting the Number of Digits Displayed Past the Decimal Point
Set the number of digits displayed past the decimal point for when numerical values are displayed on the main
display and sub-display of the Sensor Controller.
Explorer pane
: [System] (double-click)
Edit pane
: [Sensor Settings] icon (
)
Initializing Settings
Returns all banks/system settings to their default settings.
• The settings of all banks/system settings are returned to the default settings regardless of the currently selected
bank number.
• Parameters for which the default values are decided by the Sensor Head measuring range (HYSTERESIS,
TRIGGER HYSTERESIS, HIGH THRESHOLD, LOW THRESHOLD) are all set to the factory default value "0".
Explorer pane
: [(ZW model name)] (double click)
Edit pane
: [Tool] icon (
)
1
Click [Sensor setup] - [Initialize sensor].
Initialization is executed.
Item
Setting item
Setting value
Description
Sensor settings
The number of decimal
places
0 to 5 Digit
(default value: 4 digits)
Set the number of digits displayed past the decimal point for
when numerical values are displayed on the Sensor
Controller.
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
2
Select the number of digits displayed past
the decimal point from [The number of
decimal places].
You can select from the above setting values.
Important
Summary of Contents for ZW-C1*T
