Omron ZW-7000 Series, User Manual

Page: 293 / 336

Specifications and External Dimensions ZW-8000/7000/5000
User's Manual
291
9
APPE
NDICE
S
*1: Indicates the distance from the front of the sensor head. The pen-shaped right angle type has a maximum individual difference of ±0.15
mm in the distance from the front of the sensor head.
*2: Capacity value when OMRON standard mirror surface target is measured at the measurement center distance as the average of 16,384
times
When connected with the Sensor Controller for the Export Control Trade Ordinance (ZW-5000T), the minimum resolution is 0.25 μ m,
regardless of the Sensor head or setting condition.
*3: Material setting for the OMRON standard mirror surface target: Error from an ideal straight line when measuring on mirror surface.
*4: Capacity value defined by 1/e
2
(13.5%) of the peak optical intensity of the measurement wavelength.
*5: When an extension fiber cable of 5 m or longer is connected, the setting rage of the measurement cycle (exposure time) changes. For
details, refer to "Setting the Measurement Cycle" p.122 in this manual.
*6: Actual value of the change in measurement value at the measurement center distance when fastened with an aluminum jig between the
Sensor Head and the target, and with the Sensor Head and the Sensor Controller set in the same temperature environment.
The value in parentheses is the actual value when using an SUS304 jig.
When measuring the thickness, the value is calculated from the difference between the heights of the surface and rear surface, so there is
no effect on the temperature change.
External Dimensions
●
ZW-S8010/S8020/S8030
Fiber cable minimum
bend radius 20 mm
Insulation resistance (Cal-
ibration ROM) Between case and all terminals: 20 M
Ω
(by 250 VDC)
Dielectric strength (Cali-
bration ROM) Between case and all terminals: 1000 VAC, 50/60 Hz, 1 min
Weight Fiber cable length 0.3m Approx. 170g
Fiber cable length 2m Approx. 180g Fiber cable length 0.3m
Approx. 29 g
Fiber cable length 2m
Approx. 39 g Fiber cable length 0.3m
Approx. 33g
Fiber cable length 2m
Approx. 43g
Accessories 1 Calibration ROM fixing screws (M2 × 5
mm), Fiber cable protective cap (1), Strap
(1), Instruction Manual, Precautions Installation plate (1), 4 unit fixing screws (M2 × 10 mm), 1
Calibration ROM fixing screw (M2 × 5 mm), Fiber cable
protective cap (1), Strap (1), Instruction Manual,
Precautions
ZW-S5010 ZW-S5020 ZW-S5030 ZW-SP5007 ZW-SP5010 ZW-SPR5007 ZW-SPR5010
Note 2. EACH DIMEN S ION I S A S FOLLOW S .
LENGTH
L
0. 3 M ( 3 00)
2M (2000)
Note 1. EACH DIMEN S ION I S A S FOLLOW S .
TYPE W.D. M
ZW- S8 010 10 0.5
ZW- S8 020 20 1
ZW- S8 0 3 0 3 0 2
76.25
( 3 0)
( 3 0) (25)
(9)
( 3 0)
M (Note1) M (Note1)
W.D. (Note1)
L (Note 2)
MEA S UREMENT
END (FAR)
MEA S UREMENT
CENTER (CENTER)
MEA S UREMENT
END (NEAR)
LIGHTENING &
RECEIVING AXI S
S TANDARD S URFACE
FIBER CONNECTOR
FIBER CABLE ( 3 .0Di a .)
LABEL CAUTION
4- 3 .5Di a . (MOUNTING HOLE S )
(7.4)
46.7 26. 8
2.75
24.5
46.7±0.1 26. 8 ±0.1
2.75±0.1
24.5±0.1
4-M 3
S TANDARD S URFACE
S TANDARD S URFACE
IN S TALLATION
S TANDARD S URFACE
IN S TALLATION
S TANDARD S URFACE
MOUNTING S CREW HOLE S
3
0
3 0
15
15
MEA S UREMENT
CENTER (CENTER)
(Unit: mm)