Omron ZW-7000 Series, User Manual

Page: 244 / 336

Setting the Output Conditions
242
ZW-8000/7000/5000
User's Manual
7-8 Setting the Output Conditions
Setting the Filter
Setting Filters p.152
Setting the Median Filter
Setting the Median Filter p.153
As an example, here is an explanation of the procedure for selecting the “5” median filter setting.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds or more to enter the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
2 Press the / key to select MEAS, then press the key.
3 Press the / keys to select “TASK1” and press the
key.
4 Press the / keys to select “FILTER” and press the
key.
5 Select “MEDIAN” as the filter type.
Press the
/ keys to select “MEDIAN” and press the
key.
6 Select the filter mode from the following:
OFF / 3 / 5 / 9 / 15 / 31
The current setting value is displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
In this example, select “5” and press the key.
7 Press and hold the key for two seconds or more to enter the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).