Omron ZUV Series, User Manual

Page: 65 / 126

3-21
ZUV
User’s Manual
Sect
ion 3
SETUP
Section 3
Setting the System Environment
Setting the Buzzer Function
Set the buzzer sound to notify start and end of adhesion irradiation.
LOCK mode-[SYSTEM]-[BUZZER]
Changing the Display Language
Set the display language of the LCD screen.
LOCK mode-[SYSTEM]-[LANGUAGE]
Setting the I/O Signal Conditions
■
Setting trigger signal input priority conditions
LOCK mode-[SYSTEM]-[OPTION]-[LIGHT OFF]
Timing charts p.4-8
■
Setting ready signals output conditions
LOCK mode-[SYSTEM]-[OPTION]-[LOG DATA]
Timing charts p.4-7
Setting value Description
OFF Sets the buzzer volume to OFF.
ON Sets the buzzer volume to ON (default value).
Setting value Description
JAPANESE Displays menus in Japanese.
ENGLISH Displays menus in English.
Setting value Description
TIME Irradiation is continued with priority given to the preset time until the end time.
(default value)
INPUT The input signal is given priority to stop irradiation even within the preset time.
Setting value Description
ON Enables irradiation log data management, and returns the RDY signal 200 ms
after irradiation ends.
OFF Disables irradiation log data management, and returns the RDY signal
immediately after irradiation ends. (default value)