Omron ZG2-DSU, User Manual

Page: 67 / 91

Serial Communication
65
ZG2-DSU User’s Manual
5
COMMUN
ICATION WITH
EXTE
R
NAL
DEVICES
Bank Data Transfer Commands
Transfer Bank Data to the Controller <BKMC2CTR command>
This command transfers bank data stored on the Memory Card to a specified Sensor
Controller.
<Command format>
<Response format>
Save Bank Data to Memory Card <BKCTR2MC command>
This command saves the data of banks 1 to 16 on a specified channel to the Memory
Card as a single bank file.
<Command format>
<Response format>
B K M C 2 C T R
B K M C 2 C T R
CR
2 1
CR
Bank file No. (max. 3 digits)
Target Sensor Controller CH
(1 digit)
Example: To transfer bank file No.2 on the Memory Card to the Sensor Controller of CH1
O K
CR
E R CR
When processing ends successfully
When processing fails
B K C T R 2 M C CR
B K C T R 2 M C 1 0 2 CR
Example: To save the bank data of CH2 to the Memory Card using bank file
No.10
Target Sensor Controller CH (1 digit)
Bank file No. (max. 3 digits)
O K CR
E R
CR
When processing ends successfully
When processing fails