background image

viii 

 

Precautions 

 

This chapter provides important information for international standards and copyright. 
Ensure to read the information carefully before use.

 

 

 

 

V720-HS04 conforms to the following laws and standards. This conformity is effective only if V720-HS04 
is used with the designated Reader/Writer, V720-BC5D4A or V720-BC5D4A-US. 

1)

 

European Standards (R&TTE Directive) 

Radio   : EN 300 330-1,2 
EMC    : EN 301 489-1,3  
Safety  : EN61010  

 
2)

 

US standards (applicable only as a set of V720S-BC5D4A-US)  

FCC Part 15 Subpart C: 2006  
FCC ID: OZGV720SBC5D4A-US  
FCC WARNING: Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 
NOTICE: This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own 
expense.  
NOTICE: Attach the accompanying ferrite core to the cable of DC power supply at the side of 
AC Mains connected with AC input and Ground terminal in order to meet FCC emission 
limits. 
 

3)

 

Canadian standards (applicable only as a set of V720S-BC5D4A-US) 

RSS-Gen Issue 1: September 2005 
RSS-210 Issue 6: September 2005  
IC Number: 850L-72BC5D4A 
NOTICE: Operation is subject to the following two conditions: (1) this device may not cause, 

and (2) this device must accept any interference, including interference that may cause 

undesired operation of this device. 

 
 
 
 
 
 
 

 

©Copyright OMRON Corporation 2006. All rights reserved. 

This document is protected by copyright and is intended solely for use in conjunction with the product. 
Notify your OMRON representative before copying or reproducing this document in any manner, for any 

other purpose.

  

 

Declarations

Summary of Contents for V720-HS04



























Reviews: