2-1
Set the IP address of the computer
The default IP addresses of the Amplifier Unit are given in the following table. Use these addresses to
set the IP address on the computer.
This example changes the last part of the IP address to a value other than 200 (i.e., to 1 to 199 or 201
to 254).
Values of 0 and 255 cannot be used.
2-1-1
Default IP Address Settings of the Amplifier Unit
Setting item Default setting
IP address
192.168.1.200
Subnet mask 255.255.255.0
2-1-2
Setting the IP Address of the Computer with Windows 10
1
Open the
Control Panel
, and select
Network and Internet
and then
Network and Sharing
Center
.
2
Select
Change adapter settings
and then right-click
Local Area Connection
.
3
Right-click
Local Area Connection
and select
Properties
.
4
Select
Internet Protocol Version 4(TCP/IPv4)
and then click the
Properties
Button.
Change the last part of the IP address to a value other than 200 (i.e., to 1 to 199 or 201 to
254).
Values of 0 and 255 cannot be used.
5
Click the “
OK
Button to colse the
Internet Protocol Version 4(TCP/IPv4) Properties
Dialog
Box.
2 Basic Operation of V640 Utility Tool
2-2
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)