Omron V530-R160E User Manual Download

Page: 269 / 294

267

V530-R160

Operation Manual

SECTIO

Maint

na
nce

SECTION 10

SECTIO

SECTION 10

Appendix

Regular Inspections

To maintain the V530-R160 in the best condition, perform the following regularly.



Clean the Lens and LED indicators with a lens-cleaning wipe or blow off dust with an aerosol air
sprayer.



Lightly wipe off dirt with a soft cloth.

• Turn OFF the power and take safety precautions before conducting inspections.
• Do not use thinners or benzene.

Inspection point

Details

Tools required

Power supply

The voltage measured at the power supply terminals on
the terminal block must be 20.4 VDC to 26.4 VDC.

Circuit tester

Ambient temperature

The operating ambient temperature inside the cabinet
must be between 0 to 50

Thermometer

Ambient humidity

The operating ambient humidity inside the cabinet must be
between 35 and 85%.

Hygrometer

Installation

Each cable connector must be correctly inserted and
locked.
The cameras must be firmly secured.
The camera lens mounts must be firmly secured.

Screwdriver

LED lights

All indicators must light when the power is turned ON.
• Verify that a through-image is displayed.
• When using an Intelligent Lighting, verify that the light

level settings are set to their maximum values.

−

Summary of Contents for V530-R160E







































































































































































































































































































Search results

Summary of Contents for V530-R160E

Reviews:

Related manuals for V530-R160E

Brands by name

Popular brands

Omron V530-R160E, User Manual

Search results

Summary of Contents for V530-R160E

Reviews:

Related manuals for V530-R160E

Brands by name

Popular brands