Omron V530-R160E, User Manual

Page: 214 / 294

212
SECTION
8
Se
rial Int
erf
ac
e
(Nor
ma
l)
V530-R160
Operation Manual
SECTION 8
Communication with the Host
Command List
Command List
 1:1 connection
• Instructing operations at the controller
These are the commands used to instruct the controller to perform operations such as reading or
changing the scene.
• Saving and loading data
These commands back up the data and saved images set at the controller in the host.
Command Function Page
@GL Performs one reading. p.216
@GC Starts continuous reading. p.216
@SC Stops continuous reading. p.217
@RD Outputs reading data to the serial interface. (Polling) p.217
@RL Outputs reading data to the serial interface.
(Polling with digit position specified) p.218
@SN Obtains the scene number of the currently displayed scene. p.218
Switches to the specified scene number. p.219
@DC Switches the display status (through/freeze) of the image. p.219
@MC Switches between the MON mode and the RUN mode. p.220
@MT Obtains the processing time. p.220
@SV Saves the setting details in the flash memory. p.221
@VR Reads the system's version information. p.221
Command Function Page
@AL Loads the system and scene data from the host. p.222
@AS Saves the system and scene data to the host. p.222
@BL Loads the image data from the host. p.223
@BS Saves the image data to the host. p.223
@CL Loads the scene data from the host. p.224
@CS Saves the scene data to the host. p.224