6-1
Section
SET (Setting) Mode
101
0. Image Adjust (DM)
Filtering Retry
If this setting is turned ON, the filtering method set will be per-
formed twice. The time required for filtering will increase by
approximately 33 ms, but when reading codes made up of dots,
reading can be performed with greater stability by performing
smoothing twice.
Example: Image obtained when smoothing is performed twice.
Procedure
1
Select
0. Image Adjust (DM).
1. Read DM (Normal)
2. Image Analysis
0. Image Adjust (DM)
2
Select
Filtering Retry.
Filtering
BGS Levels
Shutter Speed
Filtering Retry