10-4
Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Video
Video
The
Video
view is similar to the
EZ Mode
interface, in that the user has the ability to perform
the same
Locate
,
Calibrate
, and
Test
routines. There is also a focal distance adjustment
tool to the right of the video view.
Video
also features
Capture and Decode
functionality, which is similar to the
Configuration
interfaces (
Communication
,
Read Cycle
,
Symbologies
,
I/O
,
Matchcode
, and
Diagnostics
).
Allows the user to take an
image capture of the
symbol in the field of view
at any time, and to
decode the symbol data.
Similar to the
Capture
and Decode
function in
the
Configuration
views.
Initiates the
Test
routine.
Allows the user to test the
reader’s read rate and decodes
per second, and also displays
decoded symbol data in the
field at the bottom of the
screen, Click
Stop
to end the
Test
routine.
Clicking this icon enables the
focal distance slide control to
the right of the video view.
The focal distance value is
displayed just below the icon.
When enabled, shows the
symbol in higher contrast
than the default contrast
value.
Symbol data and
Test
results are
shown in this field.
Initiates Calibration routine.
Activates the reader’s target
pattern and initiates live
video display of the symbol
in the field of view.
Summary of Contents for V430-F-series
