![background image](http://html.mh-extra.com/html/omron/sysmac-ny512-1300/sysmac-ny512-1300_user-manual_742451091.webp)
4-5
4 Determining IP Addresses
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
4-
2 Co
ntro
ller IP Add
ress Sett
ing
s
4
4-
2-1 D
eterminin
g IP Addresses
4-2
Controller IP Address Settings
Use one of the following methods to set the IP address for the built-in EtherNet/IP port on the NY-series
Controller. The IP address for the internal port can be set only by using a user-specified address.
Setting a User-specified IP Address
If you need to change the default IP address of the built-in EtherNet/IP port or if you need to use the
built-in EtherNet/IP port with another EtherNet/IP node, set the IP address to the required value.
For an NX-series CPU Unit, you cannot set IP addresses that make two built-in EtherNet/IP ports
belong to the same network.
Automatically Obtaining the IP Address from the BOOTP Server
There are two methods to automatically obtain an IP address.
•
Obtain the IP address from the BOOTP server each time the power is turned ON.
•
Obtain the IP address from the BOOTP server once when the power is turned ON and then do not
allow it to change.
4-2-1
Determining IP Addresses
BOOTP client
BOOTP command
BOOTP server
NY-series Controller
NJ/NX-series Controller
Ethernet
IP address
Summary of Contents for Sysmac NY512-1300
Page 459: ......