Omron Sysmac NY512-1300, User Manual

Page: 390 / 460

Appendices
A-4 NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
Use the Network Configurator if a CS-/CJ-series PLC operates as the originator device.
*1 Variables with its Network Publish attribute set to Output or Input in the Global Variable Table are called net-
work variables.
A-2-2 Procedure to Make the EtherNet/IP Connection Settings with the
Sysmac Studio
1
Registering devices
• Main Window
Register devices with which the EtherNet/IP connec-
tions are established to the project.
Setup Window
2
Creating network variables(*1)
... Refer to Registering the Net-
work Variable for the Origi-
nator Device
on page A-11.
Global Variable Table on the
Sysmac Studio
3
Registering tags and tag sets
... Refer to Registering the Tag
and Tag Set on page A-13.
EtherNet/IP Connection Set-
tings (Tag Set Display)
Register the network variables that are set in step 2 as
tags and tag sets.
4
Setting Connections
... Refer to Setting Connections
for the Originator Device on
page A-16.
EtherNet/IP Connection Set-
tings (Connections Display)
Specify devices (i.e., target devices and originator
devices) and tag sets to communicate with using the
EtherNet/IP connections.
5
Going online from the Sysmac
Studio
... Refer to Transferring the
Connection Settings Data on
page A-28.
• Main Window
6
Downloading EtherNet/IP con-
nection settings
Note Connections automatically
start after the download.
... Refer to Transferring the
Connection Settings Data on
page A-28.
• Synchronization Window /
Transfer to Controller Dia-
log Box
• EtherNet/IP Connection
Settings
7
Checking operation
Stopping and starting connections
... Refer to A-2-5 Checking
Communications Status with
the Sysmac Studio and Trou-
bleshooting
on page A-33.
EtherNet/IP Connection
Monitor Tab Page
NY-series Controller
CS-/CJ-series PLC
Settings for the target device Settings for the originator device
Setting only with
the Network Configurator is possible.