A-13
Appendices
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
A-2 U
se th
e Sysmac
S
tudio
to
Set t
h
e T
ag Da
ta
L
inks (
E
th
er
N
et/IP Co
nn
ectio
ns)
A
A-2-4 Making
the EtherN
et/IP Connecti
on Settings w
ith th
e Sysmac S
tudio
Register the required tag and tag set for the EtherNet/IP connections.
You can register tags and tag sets in the EtherNet/IP Connection Setting Tab Page.
Precautions for Correct Use
Precautions for Correct Use
Make the following settings to refresh all of the tag data in the same tag set at the same time.
•
Use the Sysmac Studio, in advance, to specify the same refreshing task for all of the variables
that are assigned to tags in the tag set.
1
Select
EtherNet/IP Connection Settings
from the Tools Menu.
The EtherNet/IP Device List Tab Page is displayed.
2
In this example, right click
Built-in EtherNet/IP Port Settings
for the originator device and select
Edit
from the menu to open the EtherNet/IP Connection Setting Tab Page.
3
Click the
(Show Tag Set Display) icon in the EtherNet/IP Connection Setting Tab Page.
4
Click the
Input
tab to switch to the Input Tab Page. Register the tag set and the tag.
Use one of the following methods to register the tag set and the tag.
5
Register tags and tag sets independently.
(1) Right-click anywhere in the Input Tab Page of the EtherNet/IP Connection Setting Tab
Page and select
Create New Tag Set
from the menu.
(2) Enter tag set name
Net_In1
directly into the list in the Input Tab Page.
(3) Right-click anywhere in the Input Tab Page and select
Create New Tag
from the
menu.
(4) Enter tag name
Net_In1
.
Registering the Tag and Tag Set
•
Independent registration
: Manually registers network variables in the Controller
as tags.
•
Batch registration
: Registers all network variables in the Controller as tags
at the same time.
Tag set name
Tag name
Summary of Contents for Sysmac NY512-1300
Page 459: ......
