8
.
Initialization Method
28
8. Initialization Method
The setting procedures in this guide are based on the factory default settings.
Some procedures may not be applicable unless you use the devices with the factory default
settings.
8.1. Initializing a Controller
To initialize a Controller, clear all memory of a CPU Unit.
With Sysmac Studio, change the operating mode of Controller to PROGRAM mode and select
Clear All Memory
from the Controller Menu. The Clear All Memory Dialog Box appears.
Check the message and click
OK
.
Summary of Contents for sysmac EtherCAT NJ101 Series
Page 33: ...30 ...
Page 34: ...2021 0621 0621 P745 E1 01 ...