Omron Sysmac CP1H, Operation Manual

Page: 599 / 810

565
Memory Allocations Section 9-9
9-9 Memory Allocations
9-9-1 CIO Area Allocation
The memory allocation about communication services status in the CIO area
of PLC is shown as the following diagram. The beginning CIO channel m is
calculated by the following equation:
m = C 10×(0xFD - Unit Address)
The following table describes the unit address for each option port.
Service Status
!Caution
Bit 15 is used for detect power condition of PLC, so do not change it at any
time. Otherwise the CP1W-CIF41 Ethernet Option Board will generate error.
Error Status
The status of errors that occur at the Ethernet Option Board is reflected as
shown in the following diagram.
Offset D15 D0
m Service Status
m+1 Error Status
m+2 FINS/TCP Connection Status
Option Port No. I/O Capacity Unit Address Range of Status Area
Option port 1 14/20 0xFC CIO2990 to CIO2992
30/40/60 0xFD CIO2980 to CIO2982
Option port 2 30/40/60 0xFC CIO2990 to CIO2992
m
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit Name Unit operation
0 to 13 Reserved Always 0.
14 Link Status 0: The link between hubs is terminated.
1: A link is established between hubs.
15 Reserved Always 1.
m+1
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 0 0
IP address setting error
IP address table error
IP router table error
Routing table error
Address disagreement
EEPROM error