Omron Sti F3SJ-B P25-01TS Series, User Manual

Page: 24 / 115

10
Chapter
2
Wiring Diagrams
F3SJ-B
User’s Manual
System Configuration and Functions
Wiring Diagrams

Minimum wiring required to check the operation of the F3SJ-B
(Wiring for deactivated external device monitoring)

Wiring for external device monitoring function
Open Open Open
0 V
Shield
Not Used (Red)
0 V (Blue)
Not Used (White)
T
est input (Black)
Reset input (Y
ellow)
24 V (Brown)
Emitter
Receiver
(Gray) Communication line (+)
(Pink)
Communication line (-)
24 V (Brown)
External device monitoring input (Red)
0 V (Blue)
Auxiliary output (Y
ellow)
Safety output 1 (Black) Safety output 2 (White)
Shield
Open Open Open
Power
supply
+24 VDC
F39-JD A-L F39-JD A-D
S1
S2
KM1, KM2
K1
*1. Use a switch for small loads (input specifications: 24 V, 3mA).
*2. F3SJ operates even when K1 is not connected.
: External test switch (connect to 24 V if a switch is not required)
: Lockout reset switch (connect to 24 V if a switch is not required)
: Safety relay with force-guided contact (G7SA) or magnetic contactor
: Load or PLC, etc. (for monitoring)
24 V (Brown)
External device monitoring input (Red)
0 V (Blue)
Auxiliary output (Y
ellow)
Safety output 1 (Black)
Safety output 2 (White)
Shield
Shield
Not Used (Red)
0 V(Blue)
Not Used (White)
T
est input (Black)
Reset input (Y
ellow)
24V (Brown)
KM1
KM2
S1
*1 *1
*2
S2
K1 KM1 KM2
0 V
Emitter
Receiver
(Gray) Communication line (+)
(Pink)
Communication line (-)
Power
supply
+24 VDC
F39-JD A-L F39-JD A-D