![background image](http://html1.mh-extra.com/html/omron/sti-f3sj-a-01ts-series/sti-f3sj-a-01ts-series_quick-installation-manual_744012008.webp)
7
F3SJ-A-01TS
Quick Installation Manual
5-5. Mounting and Beam Alignment
1. Attach the top/bottom brackets.
Tightening with torque exceeding the recommended value too much may lead to a failure.
2. Attach the intermediate mounting brackets (2) and (3).
For mounting positions of the intermediate mounting brackets (2) and (3), refer to 5-4 E dimensions.
Fit in the slot of the convex block
Mounting screw
(M5x20)
Top/bottom
mounting
bracket (2)
Mounting screw
(M3x8)
Top/bottom
mounting
bracket (3)
Top/bottom mounting
bracket (1)
Tighten lightly
(Recommended tightening torque: 2.3N
•
m)
Insert the tab in the slot
Mounting
screw
(M3x10)
Intermediate
mounting
bracket (2)
Intermediate
mounting
bracket (3)
Attach the bracket so that the tab of the bracket
in the dotted circle should be on the back end.
Tighten
lightly
Check
position
Step1
Mount
Step2
Align
beams
Step3
Mounting/Beam Alignment
Function Selection
Pre-Operation Checklist /
Maintenance Checklists
Summary of Contents for Sti F3SJ-A 01TS Series
