No.17S023-02
STC-S133MIP
Product Specifications and User’s Guide
25/64
6.6 Basic operating procedure
The camera communication software (KSACtrl) use UART communication.
It is necessary to setup Raspberry Pi to use UART from / to I2C conversion.
The camera communication software (KSACtrl) is usable after install KSACtrl software.
Start KSACtrl software.
Select the COM port number to use the camera communication by selecting “Port Setting” under “Comm (C)” in the
menu.
Select “Read All” button to read all of the register information from the camera.
All of the camera settings are configurable through the camera control software.
