No.18S065-03
11/71
STC-MBS2041POE / STC-MCS2041POE
Product Specifications and User’s Guide
5 Specifications
5.1
Electronic Specifications
Product
STC-MBS2041POE
STC-MCS2041POE
Image Sensor
1” 20M Progressive Monochrome CMOS
(SONY: IMX183)
1” 20M Progressive Color CMOS
(SONY: IMX183)
Shutter Type
Global Rest /
Rolling Shutter
Active Picture Elements
5,472 (H) x 3,648 (V)
Cell Size
2.4 (H) x 2.4 (V) µm
Sync System
External trigger (Hardware / Software) / Free run
Scanning Mode
Full scanning (Full resolution)
/ ROI
Frame
rate
(at full
scanning)
Rolling, free run
8bits: 5.6 fps
/ 10bits: 2.8 fps / 10bits Packed: 3.7 fps /
12bits: 2.8 fps / 12bits Packed: 3.7 fps / RGB8: 1.8 fps
Maximum frame rate: 12.31 fps @ 2 lines (8bits)
Rolling, trigger /
Global reset
8bits / 10bits Packed / 12bits Packed: 2.9 fps
10bits / 12bits: 2.8 fps
RGB8: 1.8 fps
ADC bit depth
12bits
Image Output Format
Mono8
/ Mono10 / Mono10Packed /
Mono12 / Mono12Packed
Mono8 / Mono10 / Mono10Packed /
Mono12 / Mono12Packed /
BayerRG8
/ BayerRG10 / BayerRG10Packed /
BayerRG12 / BayerRG12Packed / RGB8
Noise
Level
8bits output
Less than 2.8 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 11.2 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 44.8 digits (Gain 0 dB)
Sensitivity (*1)
720 Lux
1,480 Lux
Exposure Time (*2)
260.902 µseconds to 16.777 seconds
(Default: 178,925.902 µseconds)
Gain
Analog Gain
0 to 15 dB
(Default: 0 dB)
Digital Gain
x1 to x3
(Default: x1)
ROI
Horizontal: 40 to 5,472 pixels, Vertical: 2 to 3,648 lines
(Default: 5,472 x 3,648)
Adjustable steps for size: 40 pixels in horizontal direction and 2 lines in vertical direction
Adjustable steps for offset: 40 pixels in horizontal direction and 2 lines in vertical direction
Gamma
Gamma 0.1 to 4.0
(Default: 1.0)
Binning / Decimation Function
N/A
Image Flip
Vertical /
Off
(Un-support: Horizontal)
Defective Pixel Correction
Up to 4,096 points (
Default: On
)
Auto
Image
Control
Auto Exposure
Support
(Default: OFF)
Auto Gain
Support
(Default: OFF)
Auto White Balance
N/A
Auto /
Manual
/ Push to Set
Operational Mode
Edge preset trigger / Pulse width trigger /
Free run
Interface
PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol
GigE Vision 2.1 and GenICam SFNC 2.4, IEEE1588 (PTP)
I/O
One opto-isolated input, one opto-isolated output and one open collector GPIO (Input or output)
Power
Input Voltage (*3)
+10.8 to +26.4 Vdc External power (via 6 pin connector) /
Power Over Ethernet (IEEE802.3af)
Consumption
+12 V / +24 V: 3.4 W, PoE: 4.4 W
Default:
Bold
