![background image](http://html.mh-extra.com/html/omron/stc-fdr/stc-fdr_user-manual_743384027.webp)
27
6-3-4. Trigger Signal
Trigger signal recording enables recording that uses external input connected to camera or TCP
command input as trigger of recording.
[1]
Setting trigger signal
1) Click the [Setting] button in the main window, then select [Trigger recording settings]
tab in the Advanced setting window.
2) Select [Trigger signal] in the Event signal section.
3) Configure the recording time.
4) Select camera to receive trigger signals in the detection condition section.
→
Only one camera can be selected.
5) Close the Advanced Setting window by clicking the [OK] button.
[2]
Starting trigger recording
6) Select [Trigger recording] in the main window. ([Trigger signal] is shown on right side.)
7) If [REC] button is clicked, status will change to waiting trigger.
→Video is saved when trigger is detected.
👉👉
The external input signal from the camera is "input 0".
Please see your camera’s manual for external input signals.
👉👉
For TCP command external input, Following command is send to this application.
Command
Description
trigger n(CR)
n
:
Camera No(1
~
8)
"0" is a recording from all cameras
(CR): Carriage return code (0x0d)
”OK” is returned if command is successfully received.
[3]
Confirming recorded video
8) Click the [History] button in the main window and confirm
(
See
2)
3)
4)