Omron R7D-BP, User Manual

Page: 237 / 328

5-60
5-10 User Parameters
5
Operating Functions
Œ
Set the No. 1 overspeed detection level when torque limit switching is enabled in the setting of the Zero
Speed Designation/Torque Limit Switch (Pn06).
Œ
When the No. 1 torque limit is selected, an overspeed error will occur if the rotation speed of the
Servomotor exceeds the setting.
Œ
This parameter is disabled when torque limit switching is disabled.
Œ
Set the No. 2 torque limit when torque limit switching is enabled in the setting of the Zero Speed
Designation/Torque Limit Switch (Pn06).
Œ
This parameter is disabled when torque limit switching is disabled.
Œ
Refer to Torque Limit on page 5-54 for information on setting details.
Œ
Set the No. 2 deviation counter overflow level when torque limit switching is enabled in the setting of the
Zero Speed Designation/Torque Limit Switch (Pn06).
Œ
This parameter is disabled when torque limit switching is disabled.
Œ
Refer to Deviation Counter Overflow Level on page 5-56 for information on setting details
Œ
Set the No. 2 overspeed detection level when torque limit switching is enabled in the setting of the Zero
Speed Designation/Torque Limit Switch (Pn06).
Œ
When No. 2 torque limit is selected, an overspeed error will occur if the rotation speed of the
Servomotor exceeds the setting.
Œ
This parameter is disabled when torque limit switching is disabled.
to
Pn6F Not used. (Do not change setting.)
Pn70
Overspeed Detection Level Setting
Setting range 0 to 6000 Unit r/min Default setting 0
Power OFF
→
ON
---
Pn71
No. 2 Torque Limit
Setting range 0 to 500 Unit % Default setting 100
Power OFF
→
ON
---
Pn72
No. 2 Deviation Counter Overflow Level
Setting range 1 to 32767 Unit
×
256 pulse Default setting 100
Power OFF
→
ON
---
Pn73
No. 2 Overspeed Detection Level
Setting range 0 to 6000 Unit r/min Default setting 0
Power OFF
→
ON
---
All modes
All modes
All modes
All modes
Pn74 Not used. (Do not change setting.)
Pn7F Not used. (Do not change setting.)