Omron NYP - 1 Series, Hardware User Manual

Page: 202 / 266

7-2-6
Replace the PCIe Card
Use the following procedure to replace the PCIe Card.
Prepare:
• The PCIe Card
Additional Information
Refer to 4-1-8 PCIe Card Specifications on page 4-17 for PCIe specifications.
• The PCIe Card mounting materials: Card Clip and Card Support
These are supplied with the Industrial Panel PC.
To replace the PCIe Card:
1
Power OFF the system.
2
Unmount the Panel PC.
3
Remove the two crosshead screws 1 indicated with "open" and then pull up 2 the PCIe
Drawer.
The indent at the side of the drawer will help you to pull the drawer from the Panel PC.
2
1
1
7 Maintenance
7-18
NY-series Industrial Panel PC Hardware User's Manual (W555)