Omron NYP - 1 Series, Hardware User Manual

Page: 163 / 266

5-5-2
Connection Procedure
Use the following procedure to connect the Industrial Panel PC.
Ensure the Panel PC is securely fastened to the mounting surface.
Ensure the mounted Panel PC can be connected to power and peripheral devices. Remove dust cov-
ers where applicable and store them in a safe place.
Additional Information
• Refer to 5-3 Mount on page 5-14 for mounting details.
• Refer to 3-10 Optional Hardware on page 3-25 for the cables advised by Omron.
Refer to individual cable specifications for cable bending requirements and connector clear-
ance.
Use the following procedure to connect the Panel PC:
1
Ensure the ground terminal is connected.
Refer to
5-4-2 Ground on page 5-28 for grounding details.
2
Connect the power connector
A
.
Hold the black part to enable the auto-locking mechanism.
B
A
Do not push the orange sliders
B
in the direction of the Panel PC because this will unlock the
connector.
5 Installation
5-43
NY-series Industrial Panel PC Hardware User's Manual (W555)
5-5 Connect
5
5-5-2
Connection Procedure