Omron NYP - 1 Series, Hardware User Manual

Page: 145 / 266

5-3-8
Prepare the Mounting Surface
The Industrial Panel PC can be mounted in a landscape or portrait orientation.
The mounting hardware is integrated into the back of the Panel PC.
Z
Y1
Y
X1
X
Z1
R
Item
Model Specifications
12.1 inch
*1
15.4 inch
*1
18.5 inch
*1
Panel cutout
dimensions
Width X1 = 314
-0 +1
mm
Height Y1 = 216
-0 + 1
mm
Width X1 = 383
-0 +1
mm
Height Y1 = 259
-0 +1
mm
Width X1 = 463
-0 +1
mm
Height Y1 = 285
-0 +1
mm
Panel thick-
ness range
*2
Panel thickness range Z1 = 1.6 to 6.0 mm
Dimensions Refer to 4-1-1 Dimensions and Weight on page 4-2 for X, Y, Z and R dimensions.
*1. Refer to 1-4 Product Configuration Panel PC on page 1-5 for model details.
*2. The minimum panel thickness depends on the panel material.
For the most common materials the minimum panel thickness is mentioned in the following steps.
5 Installation
5-25
NY-series Industrial Panel PC Hardware User's Manual (W555)
5-3 Mount
5
5-3-8
Prepare the Mounting Surface